(Bulk Purchase) Asahipen Crack/Water Leak Seal Spray Crack Repair 300ml White [x3]

[Features]
●Apply to areas where water enters to prevent water leakage ●Since it is an aerosol type, it is easy to handle, use only the required amount and store the rest as it is ●Once dried, it can be overcoated with water-based or oil-based paint Possible

(Application)
Painting and repairing cracks and crevices in concrete, asphalt, brick, etc. *Do not use on floor surfaces.
* Not suitable for places where water is constantly splashed or submerged in water, or where it is always damp.

【how to use】
●Remove sand, dust, oil, etc. from the surface to be coated, wash with water if necessary, and then dry thoroughly.
●Because the paint may splatter over a wide area, cover the areas where the paint does not adhere with masking tape beforehand.
●Cracks of 0.5mm or larger should be filled with repair material such as putty before construction.
●When using, shake the container well (about 30 seconds after you hear the sound of the stirring ball) and mix well. Shake the container occasionally during use to mix the contents well.
●When spraying paint, keep a distance of 20-40 cm between the surface to be painted and the nozzle.
●Take a test coat on an inconspicuous area and check the color, jetting condition, dryness, effect on the base, adhesion, etc. to make sure there are no abnormalities before applying.
●Do not apply a thick coat all at once. While moving parallel to the surface to be coated, apply 2 to 3 coats evenly on the cracks in slightly thin layers.
●After use, turn the container upside down and blow dry for about 2 seconds so that the nozzle does not become clogged.

【detail】
・Standard: 300ml Usage: [One coat] 0.5-0.7m2
・Materials/components: Synthetic resin (acrylic), pigment (excluding clear), organic solvent ・Drying time: Summer/30-40 minutes Winter/1-2 hours

【Notes】
●Do not use for purposes other than those indicated.
●Apply on days with good weather and low humidity.
●Do not use this product when the base is damp or wet. Make sure the base is dry before using.
●Do not paint in windy or dusty conditions.
●Do not use if you are in poor physical condition or if you are sensitive to allergies or chemicals.
●Wear a mask, goggles, and gloves (the paint does not penetrate) as necessary to prevent inhalation or contact with eyes while handling. Avoid contact with skin as it may cause inflammation.
●Ventilate well during painting and drying as it contains organic solvent.
●When spraying paint, please be careful not to get it on people or objects.
●Cannot spray when the container is upside down.
●The color of the cap may differ slightly from the actual color.
●The coating area and drying time may vary slightly depending on the color, material, method of application, and weather conditions.
- The clear is finished in a wet color.
●If you have no choice but to throw away the paint inside, please spread it on a newspaper outside without fire, let it dry completely, and dispose of it as general garbage.
●When disposing of the container, follow the indication at the bottom of the container to remove the gas and paint inside, and separate it from other garbage before throwing it away.
●If the container is dropped, the contents may leak, so handle with care.